Install New Sacrificial Anode Rod. … Once you get the anode rod inside, tighten it by hand until you cannot anymore. Then, use the socket wrench to tighten it a bit more, about 1/2 turn, 180 degrees. Do not tighten so hard that the water heater begins to move or twist.

How long should your anode rod be?

The anode rod is a metal rod, normally no longer than 44 inches (sometimes 53 inches), that protects your water heater from rust and corrosion. It’s usually made of zinc, magnesium, aluminum, or a combination of these metals.

Will a bad anode rod symptoms?

A bad anode rod can cause discolored water, a rotten egg smell, air in the lines and intermittent hot water. The anode rod protects the tank of electric water heaters & signs it should be replaced are a rotten egg smell, no heat & strange sounds.

Does the length of an anode rod matter?

The length of the anode rod is important in the case of a sacrificial anode. Indeed, as its name suggests, it sacrifices itself to protect your tank from corrosion. As a result, the more magnesium or aluminum there is on the anode, the longer the protection time of your water heater will be.

Is it OK to remove anode rod?

Yes, you can cut your sacrificial anode rod, whether it is magnesium or aluminum, to replace it. To do this, use a pair of gloves and a saw and cut as you remove the old anode.

How often do you need to replace the anode rod in a water heater?

Most water heater manufacturers will recommend inspecting the condition of the sacrificial anode every one (1) to three (3) years and replacing it when it has been consumed more than 50%. This is especially true if you have hard water or use a water softener.

Are water heater anode rods universal?

In most cases, water heater anode rods are universal. The only exceptions are : Buderus : They use another type of threading to install the magnesium anode. Bradford White : Some model have the anode is built into the hot water outlet.

Is longer anode rod better?

soupmaster666 wrote: A longer anode may have more material and more surface area. That might or might not make it more effective, and might or might not make it last longer.

How do I know what size anode rod to buy?

As a rule you want the anode to be “tip to toe” running the full height or length of the tank. If you cant see your brand on the chart then just measure the length of the tank and pick the closest length of anode. If the anode is too long they can be simply cut to length with a hack saw.

Which anode rod do I need?

Magnesium anode rods are expected to work better in a home with soft water. Aluminum anodes are appropriate for homes with hard water and a high PH. Zinc anodes work best if a home is starting to smell like rotten eggs and is best for replacing water heaters that already dissolved.

Article first time published on

What happens if you don't change your anode rod?

The rods can deteriorate in as short a period as 3 to 5 years, depending on many factors that include the hardness or softness of your drinking water. Without a working anode rod, the water heater tank will be vulnerable to rust, corrosion, and other damaging effects of chemicals and minerals in the water supply.

How do you test a water heater anode rod?

  1. Disconnect power at the breaker for an electric water heater.
  2. Shut off the gas valve for a gas water heater and make sure the pilot light is extinguished.
  3. Close the cold water inlet valve or main water supply.
  4. Turn on the hot water at a faucet somewhere in the house.

Do aluminum water heaters need anode rods?

If you have a Suburban water heater, the tank is porcelain-lined steel and requires an anode rod to prevent corrosion of the steel tank. If you have an Atwood water heater, your water heater tank is aluminum and does not require one.

What causes rotten egg smell in hot water heater?

The rotten egg smell is caused by a hazardous gas called hydrogen sulfide. In addition to the strong odor it produces, hydrogen sulfide can also cause discoloration in kitchen and bathroom fixtures and can even alter the taste of food.

Do powered anode rods really work?

Powered Anode RodNormal Sacrificial Anode RodAntibacteria EffectivenessExcellentModerate/Excellent for zinc rods

Can anode rod causing rotten egg smell?

The most common cause of smelly water is anaerobic bacteria that exist in some water and react with the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor.

How long will water heater last without anode rod?

Diminished Water Heater Lifespan: Without a sacrificial anode rod replacement, the average tank water heater will last a maximum of 8-12 years. However, your water heater may start failing as early as 5 years old without this essential care.

Do all hot water tanks have anode rod?

Anode rods are an essential component of tank-style water heaters. Most anode rods are sacrificial, meaning they are designed to corrode (instead of your water heater lining). … Tankless water heaters don’t have anode rods, but all standard tank-style water heaters do.

How often should you flush your water heater?

Tip: To maintain the upkeep of your water heater, flush your water heater every six months or so. If you have harder water, or water that contains more minerals, you may want to flush it more often.

Can I use impact driver to remove anode rod?

To loosen the rod, you’ll need an air compressor, a 1/2-in. -drive impact wrench and a 1-1/16-in. … If you don’t have an impact wrench, go buy a cheap one for about $30. Even with a breaker bar, it can be nearly impossible to break the anode rod free.

How much does it cost to replace anode rod in water heater?

An anode rod costs about $50. Some homeowners may feel comfortable replacing it themselves. If not, call a professional plumber, who can assist. The cost of having it replaced professionally may be around $250 or $300.

Which is better an aluminum or magnesium anode rod?

For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.

How many anode rods are in a water heater?

Usually when a hot water tank has two anodes you will find one of each. Hex head anode rods have a nut on them the threads directly into the top of the hot water tank. The tank has a threaded opening built in during the manufacturing process. It is possible to have two or more anode rods installed in your tank.

Does an Atwood gc6aa 10e have an anode?

No anode required with an Atwood water heater just drain when not in use, but you will need a spare plastic drain plug or 2.

Is Atwood and Dometic the same?

Atwood is now Dometic Atwood Mobile Products was founded in 1909 as the Atwood Vacuum Machine Company by brothers James and Seth Atwood. … In 2014 Dometic purchased Atwood Mobile Products to complement and bolster Dometic’s robust product line.

Do Dometic RV water heaters need anode rods?

Atwood (Dometic) water heaters are made of light-weight aluminum tanks and do not have an anode rod. Another increasingly popular choice among RVers is the switch to a tankless water heater.