Leader heads or conductor heads are components of a roof drainage system which are known by different names, but they all mean the same. They are funnel-shaped elements, connected in most cases to a gutter, and from there to a downspout. … In those cases, the leader head provides the transition from scupper to downspout.

What is a leader on a roof?

In plumbing, a pipe installed to drain water from the roof gutters or roof catchment to the storm drain or other means of disposal. Also called a conductor, downspout, or roof drain.

What is a leader pipe?

Leaders, also known as Downspouts, are vertical pipes that carry rainwater from the gutters to the ground, sewers, or wells.

What does a gutter leader head do?

A leader head is basically a catch basin, which helps funnel water from the rooftop to the underground drainage system. It is typically installed under the soffit so that it can allow air into the line. Because of this, leader heads can help stop vacuum lock and prevent gurgling or excess noise.

Is a leader and downspout the same?

As nouns the difference between leader and downspout is that leader is any person that s or directs while downspout is a vertical pipe or conduit that carries rainwater from the scupper, guttering of a building to a lower roof level, drain, ground or storm water runoff system.

What is rain leader?

n. a vertical pipe for conveying rainwater from a roof or gutter to the ground or to a drain; leader.

What is a gutter head?

This is the enlargement, catch basin or box secured at the top of the downspout. It is used to capture water runoff from the rain guttering or roof scuppers of a building. Importance of Gutter Leader Heads. A gutter leader head can make or break the projected image of your home.

What is an aluminum leader?

Aluminum Downspout Leader Head The purpose of the gutter leader head is to connect the gutter to the downspout. The wide opening helps water to flow faster through the downspouts, which is especially helpful in heavy rains.

What is the purpose of a gutter collector box?

Gutter leader heads, also known as collection boxes or conductor heads, are gutter system components that add protection against overflow at the roofline. A leader head also serves as an aesthetic component to an otherwise plain-looking gutter systems.

What is scupper drain?

In short, a scupper is a detail that provides drainage to a roof system by allowing the water runoff from the roof to exit the roof through a metal edge, parapet wall or through the deck into a downspout or leader not run through the interior of the building.

Article first time published on

What is a leader box?

Leader Box is an app from Disruptive HR which contains tips and hints to help leaders:- have great conversations. run better meetings. ask the right questions.

What are the parts of a gutter system?

  • Gutters. The gutters themselves are the long, rounded pieces that catch all the rainwater and debris and send it down the pipeline. …
  • Downspouts. The gutters may collect the rain, but that water needs to go somewhere. …
  • Elbows. …
  • End Caps. …
  • Gutter Guards. …
  • Hidden Hangars.

What is a corner Leaderhead?

Without a gutter, water pours off the “valley” where two roofs join. If you don’t have guttering there, consider this corner leaderhead! It works great to catch the water and direct it onto a rain chain. It comes with a removable brass screen in the top to let water in and keep debris out.

How do you keep downspout extensions from blowing away?

CradleStake secures your downspout extensions and prevents them from blowing off in a wind or rain storm.

What are rain liters?

Definition: A rain leader is a pipe that collects the water discharged from your gutters and downspouts, and moves this stormwater away from your home.

What size are downspouts?

Downspouts are commonly 2 x 3 inches and 3 x 4 inches in size or 3 or 4 inches in diameter. When determining the size of a home’s gutter system, a homeowner should consider the area’s rainfall density.

What is a gutter scupper?

Description: Scuppers are used to provide an outlet through parapet walls or gravel stops on flat and built-up roofs to allow drainage of excess water. … Scuppers can be installed to carry water into gutters or directly into downspouts through conductor heads.

What is a downspout conductor head?

Conductor heads or Leader heads are items attached to the very top of downspouts (leaders), hence the name leader head. Used for both aesthetics and functionality, helping hold excess water from a gutter, scupper or valley on a roof, for example.

What is Cascade drain?

Cascade drain is one of the hydraulic structures that are widely used in slope. condition area. The functions of cascade drain are to control and convey flows from. surface runoff at upstream to downstream.

What is roof drain called?

Many people ask, “What are roof drains called?” and they are simply called roof drainage systems. The drainage system starts at the roof line and then you have roof drainage to ground. The components that you need for a roof drainage system is a gutter system and downspout.

Should you plug scupper holes?

If you’re kayaking with a heavy load, you should plug in your scupper plugs before paddling. The extra weight will submerge your kayak further down, and water will rise from the holes. The scupper plugs will protect you from capsizing. In the summer, covering the scupper holes might not be a priority.

How does a conductor head work?

Conductor heads are used to channel water that runs from a home’s gutters into the connected downspouts. They catch the excess water and keep the downspouts from becoming overwhelmed by directing the runoff in a more controlled manner.

What is the synonym of leader?

  • chief.
  • commander.
  • director.
  • head.
  • manager.
  • officer.
  • ruler.
  • boss.

What do you call gutter?

An eaves gutter is also known as an eavestrough (especially in Canada), rhone (Scotland), eaves-shoot (Ireland) eaves channel, dripster, guttering, rainspouting or simply as a gutter. The word gutter derives from Latin gutta (noun), meaning “a droplet”.

What are gutter pieces called?

End Caps. End caps are the gutter parts tasked with preventing stray water and debris from prematurely exiting the gutter. In most instances, the end caps are flat pieces of metal (shaped similar to the gutters) attached to the end of the sections or when the gutter runs into the side of the home.

Is gutter part of the roof?

Rain gutters and downspouts are vital parts of your roof system.

How do you hang Rain chains without gutters?

  1. Select a corner of your roof that sheds rainwater in a vertical stream. …
  2. Drill a hole in the bottom of the bucket. …
  3. Screw the eyehook into the soffit under the roof crease where you’ll hang your rain chain. …
  4. Remove the handle from the bucket. …
  5. Lay the metal rod across the bottom of the bucket.

Should you remove downspout extensions in winter?

If you have a lot of winter precipitation as rain, or a lot of melt-water, you need to get the runoff out and away from the house foundation, which is the purpose of a proper downspout system. Thus, extending the outflow of the downspouts is needed year around to prevent this.

How do you secure gutter downspouts?

Use two screws per joint. Fasten the downspouts snugly against the wall, with two flexible aluminum downspout bands per 10-foot section using nails or screws. A little temporary duct tape helps to keep the downspout stationary while fastening.