If the wood is going to be in direct exposure to wind, rain, and sunlight, an oil-based stain is the best choice. This is because it is more durable than a water-base and will provide a more complete protective layer against these elements.

Is oil based or water based stain better for a deck?

Oil decking stains penetrate wood very well and provide excellent protection. Oil molecules are smaller than water molecules so it penetrates better in comparison. The better a wood decking stain penetrates the better it performs and lasts. By nature, oil based deck stains are easier to apply than water based.

What wood stain lasts the longest?

  • Solid. Just like regular paint, solid stains hide the grain of wood, and the best should last three to five years on a deck, the longest of the three types of stains. …
  • Semi-transparent. …
  • Clear sealer.

How long does water based stain last?

Water-based stain will last 1 year, if opened, and 2 years, if unopened. Oil-based varnishes will be good for 1 year, opened or unopened.

What kind of stain is best for a deck?

Decks are best stained with a semi-transparent wood stain. These types of products allow the natural grain of the wood to show through, allow the wood to naturally breathe, and are easily cleaned and reapplied. Pay attention to the directions and don’t over apply these types of products.

When should I use water based stain?

Water-based stains are usually best under water-based finishes because these finishes don’t bond well over oil or varnish stains unless you give them a week or longer to thoroughly dry. Unfortunately, water-based stains are more difficult to use because they raise the grain of the wood and they dry fast.

Should I stain or oil my deck?

Whether you should oil or stain will come down to what you want from your deck. A stain will improve the appearance of the deck, but oil will better help preserve its condition. … However, you can bring back the natural look of the wood by using a pressure washer or choosing a decking oil with UV inhibitors.

How do you prepare wood for water based stain?

Before applying stain, all raw wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail. 1. Sand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150- grit, then 180-grit.

Do you have to seal oil based stain?

After Staining Wood do You Have to Seal It? The short answer to this common question in wood finishing is no. The long answer is yes. In reality, you don’t have to do anything you don’t want to when to comes to your projects.

Is Behr or Olympic stain better?

According to Consumer Reports, Olympic Maximum Solid Stain & Sealant in One is rated in their top solid wood stains category, coming in slightly behind Behr.

Article first time published on

Which wood is best for staining?

Oak is generally the best wood for staining because it has large pores that take stains easily. Cedar is also well known for its ability to take stains well. Other woods that take stains easily include chestnut, hickory, and ashwood.

Should I use semi-transparent or solid stain?

For newer wood, go with clear, transparent or semi-transparent stains — that way some grain still shows through. Semi-solid stains are a better choice for decks that have seen their share of cookouts. You’ll still see some grain, but you’ll hide more of the wear and tear your deck has endured.

Can I put oil based deck stain over water based?

QUESTION: Can oil and water based products be used over each other? ANSWER: Yes! but the underlying finish has to be absolutely dry. … When using an oil based topcoat over a water based stain or milk paint, allow water based finishes, such as HP topcoat to dry at least 24 hours before coating with an oil based product.

How many coats of stain should you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

Why does my deck stain peel every year?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. … Often times this problem will be most evident in the spring time when the deck begins to dry out after all of the winter moisture.

Can I put decking oil over stain?

Anyway, don’t apply oil over a deck stain. The deck stain works because it contains pigment and a binder (usually oil or water-based finish) to bond the pigment in the wood. You don’t want a build because it will peel if water gets underneath. … If the water stays puddled, the wood is sealed.

What is the best protection for a wood deck?

  • BEST OVERALL: SEAL-ONCE MARINE Wood Sealer, Waterproofer & Stain.
  • BEST BUDGET: Rust-Oleum 9441 Ultimate Spar Urethane Oil Based.
  • BEST FOR WATERPROOFING: Thompson’s WaterSeal Wood Protector.
  • BEST WITH UV PROTECTION: DEFY Crystal Clear Composite Deck Waterproofing.

How often should you oil decking?

How Often Do I Oil My Deck? Within the deck building industry, it is usually recommended that decks need to be oiled once every 6-12 months.

Is oil based or water based polyurethane better?

1. Oil based polyurethane looks better. It has a more depth – both in color and shine and it looks the way we expect hardwood to look. Water based polyurethane has both a duller color and a duller finish.

Can I use water based stain over oil?

Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry. When using a water-based product over an oil-based product, such as water-based High Performance Topcoat over oil-based Gel Stain, wait 72 hours before applying the water-based product.

Does oil stain protect wood?

Oil-stained wood is a superior finish for wood. It protects the wood from the inside out, rather than only a surface protection such as lacquer or varnish offers. … But oil-stained wood needs additional protection that should be replenished at regular intervals.

Does water based stain seal wood?

Breathability – Water based stains are a more breathable finish. This allows the wood to use its own inherent properties of protection. It will not trap moisture in the wood and it works well with less dense woods that have natural rotting resistance such as cedar, cypress and even redwood.

How long does it take for an oil based stain to dry?

Oil based products dry more slowly than water based products. In good conditions, allow 6-8 hours. In cold or damp conditions, allow 24 hours.

Do I need to sand between water based stain?

With water-based topcoats, sand any “grain-raise” smooth before applying the final coat. Note: Sanding between coats is not necessary, but it will provide a better finish. After a coat has dried, use 220 or 240 grit sandpaper or extra fine steel wool to lightly sand surface.

Do you have to wipe water based stain?

Water-based stains dry extremely fast, so you need to wipe off any excess stain within 2 minutes of first applying it. To remove the excess stain, you’ll use a synthetic pad and wipe the stain in the direction of the wood grain.

Can I add water to water based stain?

Water-based stains can be thinned with, you guessed it, water. … A thinned water-based stain might need even more coats to produce the color you want.

Is Cabot or Behr deck stain better?

Additionally, we were pleased to see that Cabot Solid Acrylic Siding stain scored very well in their 2014 ratings.” And after two years the Behr still looked really good, but the Cabot had started to break down. In fact, the Behr Premium Semi-Transparent Weather Proofing Wood Stain earned top ratings.

Is Cabot deck stain any good?

Absolutely the best oil-based deck stain on the market. It penetrates and preserves where applied. I did my large deck completely with 2 coats and the deck still looks brand new. If you want to use the very best then you want to use Cabot’s oil-based stains.

What is the best deck stain in Canada?

Two popular brands of deck stains compliant in Canada are Defy Stains and Armstrong Clark Wood Stain. Both are high on our list of best stains and are VOC compliant in most states and Canada. They come in a wide range of opacities and colors to fit the needs of most deck owners.

What wood stain looks like pine?

Soft white maple with a light stain will look similar to most pines. It will finish with a smooth surface like pine.

What wood takes dark stain best?

We’ve found that Hard Maple is the best choice for optimizing the look of espresso stain. It has just the right color and fiber density to soak the espresso stain up, optimizing those rich, dark brown hues.